FTTH Drop Cable Gjyxch 2core Self-supporting G652D G657A1 For Indoor Outdoor Internet Project
FTTH drop cable G652D G657A1
,self-supporting FTTH drop cable
,indoor outdoor internet project cable
| Description | ||||||||
|
The GJYXCH fiber optic cable is a self-supporting, bow-type flat drop cable designed primarily for Fiber to the Home (FTTH) networks. It features a single or multi-core optical fiber unit positioned at the center, flanked by two parallel internal strength members, and physically bound to an integrated external steel messenger wire. This unique structural layout enables the cable to withstand the mechanical tension required for aerial outdoor runs before transitioning smoothly into indoor premises. |
||||||||
|
Characteristics |
||||||||
|
1. High bandwidth and excellent communication transmission property.
|
Structure
Optical Fiber Unit: Located right in the center. It typically uses G.657.A1 or G.657.A2 single-mode fibers, which are optimized for ultra-low bending sensitivity. This allows the cable to bend around tight corners inside buildings without degrading signal quality. Common configurations range from 1, 2, to 4 cores.
Internal Strength Members: Two parallel metallic steel wires or Fiber Reinforced Plastic (FRP/KFRP) rods are placed alongside the center fibers. These protect the delicate glass cores from crushing forces and side pressure.
External Messenger Wire: A distinct, self-supporting 1.0mm to 1.2mm steel wire runs parallel to the main body within a figure-8 layout. This component bears the high tensile load during aerial suspension, saving costs by removing the need for external support lines.
Outer Sheath: The entire structure is wrapped in a black or white Low Smoke Zero Halogen (LSZH) jacket. This makes the cable safe for indoor use, as it emits minimal smoke and no toxic halogen gases if exposed to high heat or fire.
FTTH Outdoor Drop Cable GJYXFCH 2 Core G657A1 with Steel Wire Messenger
The GJYXFCH outdoor FTTH drop cable is designed for last-mile fiber access networks, especially for aerial and wall-mounted installations from distribution points to end users. This cable integrates 2 cores single mode G657A1 fiber, a steel wire messenger, and dual FRP strength members, providing an excellent balance of flexibility, tensile strength, and long-term reliability. With its compact structure and stable mechanical performance, the GJYXFCH drop cable is widely used
12 Core Outdoor FTTH Drop Cable – Loose Tube Design with Triple Steel Wire Strength Members
This 12 core outdoor FTTH drop cable is developed for access and distribution networks that require higher fiber capacity while maintaining compact size and strong mechanical performance. Featuring a central loose tube structure and three steel wire strength members, the cable is suitable for outdoor aerial and facade installations in FTTH and FTTx networks. The loose tube design protects the optical fibers from environmental stress, while the triple steel wire reinforcement
GYFXTY 12Core Outdoor FTTH Ground Drop Cable Central Loose Tube All-Dielectric Fiber Optic Cable
Product Overview The Ebocom GYFXTY Outdoor Fiber Optic Cable is a central loose tube, all-dielectric cable engineered for FTTH, FTTx access networks, and rural broadband projects. Designed with a single gel-filled loose tube, it protects the fibers from moisture and mechanical stress, ensuring low attenuation and high transmission stability. Two parallel FRP (Fiber Reinforced Plastic) rods act as the primary strength members, delivering excellent tensile resistance without
Fiber Optic Cable FTTH Drop Cable 1core GJXH For Indoor Networking Internet Communication
Description The fiber optic cable‘s structure :optical fiber unit is located in the center. Two parallel steel wire are located on either side as an reinforcement.Finally, the cable features a black LSZH jacket. Optical fiber parameters: Optical performance Unit Data 1.Geometry Characteristics 1.1 Cladding diameter um 125±1.0 1.2 Fiber/package concentricity deviation um ≦0.6 1.3 Cladding non-circularity % ≦1.0 1.4 Outer coating diameter um 242±7 1.5 Coating/cladding
