fiber optic patch cord
Found 141 Products
Low loss GYXTW Optical Fiber Cable 12 24 core G652D for aerial and duct laying
Description: This type of cable is suitable for outdoor use in piping and overhead applications. Center tube type construction, we offer GYXTW from 2 to 12 core fiber. There are single mode and multi-mode types to choose from. Features: Good tensile strength and compressive strength. Patience. Good moisture, water resistance, flexibility. Double wire as reinforcement provides excellent strain performance. Applications: Suitable for network access. LAN network. Overhead and
GJFJH Indoor Optic Fiber Cable Tight Buffer 2 4 12 24 Core SM MM OM1 OM2 For Networking
Product Introduction: Indoor fiber optic cable are optical cables laid in buildings. It has low tensile strength and light weight, which is economical for establishing communication network in buildings. Its mainly used for communication indoors, computers, switches and end user equipment in buildings. The distance of indoor fiber optic cable is generally not long, and multimode fiber cable can be used. Optical fibers like same multimode bandwidth, gigabit and 10G and
Indoor Optical Fiber Cable gjfjv 90μm Tight Buffer 2 4 12 24 Core SM MM G652D networking
Product Introduction: Tight buffer optical cable refers to a type of fiber optic cable where the individual optical fibers are directly coated with a layer of protective material, known as a tight buffer. Unlike loose tube cables where fibers are housed in individual tubes, tight buffer cables have each fiber tightly buffered with a plastic coating. Features: Enhanced protection: The tight buffer provides excellent protection against physical damage, moisture, and environment
G652D Fiber Type Aerial GYFTY Optical Fiber Cable 2-144core Non-Armoured HDPE Jacket for Self Supporting
GYFTY Cable- Outdoor optical cable for communication with nonmetallic(FRP) reinforced member, loose tube stranding with filler and polyethylene outer sheath. GYFTY Cable Characteristic: 1.Select high-quality optical fiber to ensure excellent transmission performance. 2.Control the excess length of optical fiber to ensure that the optical cable has excellent mechanical characteristics and temperature characteristics. 3.Strict process and raw material control to ensure stable
GJXH Optical Cable Sm G657A2 1 2 4 Core Fibra Optica Cabo LSZH Jacket Fiber Networking
Fiber Optic Drop Cable access to the use of dish-shaped optical cable (indoor wiring) is the optical communication unit (fiber) in the center, placed on both sides of two parallel non-metallic reinforcement (FRP) or metal reinforcing member, and finally extrusion black or color poly Vinyl chloride (PVC) or LSZH (LSZH, low smoke, halogen-free, flame retardant) jacket. Item Technology parameter Cable type Drop Cable Cable Count 1 2 4 6 8 12 Fiber color Green, Yellow Fiber type
SC UPC Fiber Pigtail cable LSZH Sheath Om3 Om4 2.0 3.0 3m 5m 2m Fiber Distribution Frame construction
An optical fiber pigtail cable is an optical fiber with only one end fixed to a connector. Available in a wide range of colors and lengths, we have cables that can be adapted to various situations. Various types of connectors (such as FC, SC, ST, LC,MU,MTRJ, etc.) There are three kinds of polished fiber end faces :PC, UPC and APC, which we manufacture using advanced processes and equipment to ensure high quality for mass production. Features: SC fiber jumper and pigtail
Indoor Colored Optical Fiber Cable gjfjv 2 4 12 24 Core SM MM G652D G657A1 OM3
Product Introduction: GJFJV type tight-buffered optical fiber bundle cable is made by evenly winding aramid yarn or high-strength glass yarn tight-buffered optical fibers as reinforcing members, and then covered with polyvinyl chloride sheath. Features: Enhanced protection: The tight buffer provides excellent protection against physical damage, moisture, and environmental factors, ensuring the integrity and reliability of the optical fibers. Increased flexibility: The tight
High speed ADSS fiber Optica cable outdoor g652d 24 core hilos single mode span 300 Aramid yarn double PE jacket
ADSS optical cable is a self-supporting aerial optical cable. The span can range from 50-1000M. It is generally divided into two sheath materials: AT and PE. The AT sheath is an electrical corrosion-resistant sheath and is used in high-voltage lines. Main Features: 1. The ADSS optical cable is hung on the inside of the cable and can be erected without interruption of power supply. 2. Light weight, small cable diameter, and small load on the tower 3. Large span, up to 1200
Outdoor FTTH Optical Fiber cable 1CORE 2 CORE G657A1 A2 LSZH 1f-4f GJYXCH high quality
FTTH outdoor optical fiber to the home cable is specially designed for FTTH engineering. It uses a double-reinforced figure-eight structure, with the fiber optic unit in the center, two parallel fiber reinforced steel wires placed on either side, and then the cable is completed with a black or white low-smoke halogen-free sheath. The lead-in cable can be introduced directly from the optical fiber connector box to the building occupant. Main feature Suitable for branch and
GJYXCH FTTH Optical Fiber Cable G657A Single Mode Fiber Outdoor/Indoor application telecommunications wire distribution
FTTH drop cable: Fiber type: G.652, G.655, or G.657 single-mode fiber, A1a or A1b, OM3 or OM4 multi-mode fiber, or other types of fiber. Sheath material: environmental protection flame retardant polyvinyl chloride (PVC), environmental protection low smoke zero halogen flame retardant polyolefin (LSZH), or other agreed materials. Sheath color: (including fiber color) in accordance with the relevant standard requirements, or other agreed colors. A typical GJYXFCH/GJYXCH self
12 Core GYTA Duct Stranded Optical Cable ISO14001 Certified and Strong Tensile for Data Center Wiring System
GYTA (Metal Reinforced, Loose-Sleeve Laminated Filled, Aluminum-Polyethylene Bonded Jacketed Outdoor Fiber Optic Cable) is a single-mode or multi-mode fiber optic cable that is enclosed in a loose sleeve made of high modulus plastic filled with a waterproof compound. At the center of the core is a metal reinforcement core or, for some cores, a layer of polyethylene (PE) extruded over the metal reinforcement core. The loose tube (and filler rope) is twisted around the central
ADSS Cable Single Mode SM G652D Double jacket PE/AT 4 to 144 core Span 100 to 1000 Outdoor Aerial Fiber Optic Cable ADSS
ADSS (All-dielectric Self-supporting) optical fibre cable is a type of self-supporting aerial fiber optic cable designed for aerial installation and deployment and is suitable for various outdoor applications. Because it is non-metallic, the ADSS cable is ideal for applications near high-voltage power distribution lines, for which it has become a standard. *ATT: Span: For ADSS optical cables, there are different spans. The span is the overhead distance between two towers. We
