GYXTW Central Loose‑Tube Armoured Cable – 2‑24 Core Single‑Mode Outdoor Fibre Cable

Contact me for free samples and coupons.
WhatsApp:0086 18588475571
WeChat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xApplication | Networking/communication | Jacket Material | PE |
---|---|---|---|
Fiber Core | 2 4 6 8 12 24 Core | Fiber Type | SM G652D/G657 |
Strenght Member | Steel Wire | Armoring | Steel Tape |
Highlight | LAN Network Cable,High Speed Network Cable,Data Transmission Network Cable |
GYXTW is the go‑to cable when you need a compact, central‑tube design that can hang between poles one day and drop straight into a conduit the next. A gel‑filled PBT tube protects up to 24 G.652D / G.657A fibres from moisture. Two parallel galvanised steel wires carry the tensile load, while a corrugated steel tape keeps claws, stones and spades at bay. The whole package is finished with a UV‑stable PE jacket so it can work for years in sun, sand or rain.
Suitable application scenarios:
-
Pole‑to‑pole spans for rural broadband and CCTV backbones
-
Metro access rings that duck in and out of ducts or hand‑holes
-
Industrial sites where rodent‑proofing and crush strength matter
-
FTTx feeder links that must handle blowing, pulling and aerial lashing
Why engineers choose GYXTW?
-
Single central tube – slim profile, simple mid‑span access
-
Twin steel strength wires – easy dead‑ending, no messenger needed
-
Corrugated armour – high crush rating without bulk
-
Low‑loss fibres – ≤0.35 dB/km @1310 nm, ≤0.22 dB/km @1550 nm
-
One jacket fits all – the same cable for aerial, duct or direct‑buried runs
Specification | Value |
---|---|
Fibre type / count | SM G.652D / G.657A, 2–24 cores |
Tube & filling | PBT loose tube + thixotropic gel |
Strength members | 2 × 1.2 mm galvanised steel wires |
Armour | Longitudinal corrugated steel tape |
Outer sheath | Black HDPE, UV & abrasion resistant |
Nominal diameter | 7.0 mm (12 F) · 8.5 mm (24 F) |
Tensile load (short / long) | 1 500 N / 600 N |
Crush resistance | 1 000 N ∙ 100 mm |
Operating temperature | −40 °C … +70 °C |
Installation methods | Aerial self‑support / duct / buried |
Standards | IEC 60794‑1‑2, ISO 11801 OS2, RoHS |
Need something else?
We manufacture in‑house, so fibre counts, print legends, drum lengths or even jacket colour can be customised with short lead‑times. Get in touch for pricing, datasheets, or a span/tension check for your route.