adss fiber cable
Found 180 Products
Figure 8 Gytc8y Fiber Optical Cable Layer Stranded Self-Supporting g652d SM aerial internet wire construction
Application: Loose tube type figure-8 cable with wire/strand metal center reinforcement and moisture-proof inner sheathing with sling wire suitable for pole to pole or pole to house overhead installation. The tubes contain single mode or multimode fibers that are color coded according to a color coding scheme. Features: Low attenuation, low dispersion Excellent mechanical and environmental performance due to correct design, precise residual length and wiring process 3.twisted
High quality GYTA53 Fiber Optic Cable 60 core with G652D strength communication
Sheathed loose tube double-sheathed/double-sheathed cables are designed to provide high fiber count with the flexibility and versatility required for todays most demanding installations, including direct-buried installations. The number of optical fibers is up to 144, and the design is twisted. Features: The loose tube gel filling structure provides excellent fiber protection. Double sheathed single armoured(GYTA53) and double sheathed double armoured(GYTA53) for rodent
Fig8 GYTC8S Optical Cab Self-Support 12 36 48 96 core Optical Cable with Quality high tensile resistance aerial Internet
GYTC8S is a fiber optic cable of loose tube construction, which is made of high modulus plastic (PBT) and filled with waterproof gel. The corrugated steel strip is used for compression resistance. The outer sheath is UV resistant PE sheath. Figure 8 Self-supporting structures provide high tensile strength, enabling easy and cost saving aerial installation. Description: Jelly filled and fiber contained loose tubes or PP fillers (if necessary) strand around the steel wire CSM
Outdoor GYXTW cable Light-Armored 2 4 6 8 10 12 14 Core for Internet installation
GYXTW fiber optic cable, single-mode/multimode fibers are positioned in the loose tube, which is made of high modulus plastic materials and filled with filling compound. PSP is longitudinally applied around the loose tube, and water-blocking materials are distributed into interstices between them to guarantee the compactness and longitudinal water-blocking performance. Two parallel steel wires are placed at both sides of the cable core while PE sheath is extruded over it.
GYTC8S Fig 8 Armoured Fiber Optic Cable 4 6 8 12 24core for Outdoor Communication
GYTC8S is a typical self-supporting outdoor optical cable. It is suitable for aerial applications, while its good moisture resistance and compression resistance are also suitable for pipeline and direct burial methods. The metal strength member is composed of multiple strands as the supporting part, and together with the polyethylene (PE) sheath, it forms an 8-shaped structure. The corrugated steel belt armor and PE outer sheath provide compression and gunshot resistance. The
24 Core OPGW Optical Fiber Composite Overhead Ground Wire ACS Stranded Structure
Product Description The Ebocom 24 Core OPGW (Optical Ground Wire) Fiber Optic Cable with stranded layer structure is specifically designed for high-voltage power transmission lines that require both grounding and communication capabilities in a single cable. This structure features optical fibers contained in a stainless steel tube, which is stranded together with aluminum-clad steel and aluminum alloy wires to form a compact, high-strength cable. The design provides
GJFJV GJFJH Indoor Optic Cable
Description The structure of GJFJV/GJFJH optical cable adopts multiple 900m (single mode or multimode) flame retardant tight-buffered optical fibers as optical transmission medium, which are wrapped with a layer of aramid yarn or glass yarn as stress reinforcement unit, and covered with PVC sheath or extruded with a layer of LSZH (low smoke zero halogen) sheath. Features Using tight-buffered optical fiber for easy stripping; Tight-buffered optical fiber has good flame
Drop cable Patch cord SC/LC/ST/MPO LSZH jacket g657a1 g652d OM2 OM3 for indoor Internet construction
Products introduction MODEL SM/MM Conector 1 SC ST LC MPO Conector 2 SC ST LC MPO A patch cable, patch cord or patch lead is an electrical or fiber-optic cable used to connect ("patch in") one electronic or optical device to another for signal routing. Devices of different types (e.g., a switch connected to a computer, or a switch to a router) are connected with patch cords. Patch cords are usually produced in many different colors so as to be easily distinguishable from each
Duplex Patch Cord LC-to-ST Om3 om4 Multimode 2.0mm 3.0mmFiber Efficiency high speed Network Equipment
Fiber jumper cables are also known as fiber jumper or fiber jumper. It is one of the most commonly used devices in fiber optic networks. Optical fiber plug-in cables are mainly divided into single-mode and multi-mode two types. Single-mode fiber connector cables are usually made of 9/125 glass fiber, and the sheath is yellow; The multimode fiber cable is made of 50/125, 62.5/125 or 50/125 10Gig glass fiber with an orange or light green jacket, respectively. Fiber Jumper
G657A1 Simplex Patch Cord
Products Description SC/UPC-SC/UPC Ftth Pre-connection drop cable Simplex Outdoor G657A1 50m 100m Patch Cord GJXH optical cable is to place the optical fiber in the center of the optical cable, place two parallel phosphating steel wire (or FRP) reinforcements on both sides, and finally extrude a black (or colored) low-smoke halogen-free flame-retardant sheath. GJXH Fiber Cable Features: * B6 anti-microbending optical fiber can be used to ensure network transmission. * Simple
Patch Cord LC SC / APC to SC/APC G652D Single Mode G657A G652D China Supply Simplex LSZH LAC indoor Internet
Ordering information: Fiber optic cable material: PVC, LSZH (low smoke halogen free) Cable diameter: 3.0mm, 2.0mm, 0.9mm, 3.0*2.0mm, 5.0*2.0mm Fiber type: Single mode 9/125um, multi-mode 50/125um, multi-mode 62.5/125um, 10G OM3 (50/125um) Polishing method: PC, UPC, APC Length: 2m, 3m, 5m Features: Good durability Good interchangeability High temperature stability Low insertion loss and reflection loss Applications: Light distribution rack Computer network Optical fiber
Cat6 Ethernet Patch Cord RJ45 Computer Network Cord high speed CAT6e LAN Networking LAC construction
Overview: The CAT6 cable is suitable for a variety of applications, including structured cabling, CCTV systems, alarm systems, telecom projects, and more. Compared with CAT5 and CAT5e, the CAT6 cable features more rigorous specifications for crosstalk and system noise, making it an ideal choice for high-performance networks. This cable can be used for voice, integrated service data network (ISDN), ATM155Mbps, 100 Mbps TPDDI, fast Ethernet, and gigabit Ethernet. Its superior
