1
Found 280 Products
OPGW Ground Wire Fiber Optic Cable 12 Core Composite Overhead networking construction
OPGW cables are usually composed of metal cores, optical fibers, oxygen-free copper or aluminum cladding, insulation and an outer sheath. The metal core wire is mainly used to withstand mechanical tension and electrical load, and to provide electrical ground wire function. Optical fibers are used to transmit optical signals and can be used to achieve communication, data transmission and to monitor physical parameters such as temperature and vibration of transmission lines.
OPGW Optical Fiber Cable SM 24 Core Power System High Voltage ground wire communication construction
OPGW Optical Fiber Cable SM 24 Core A central stainless steel tube (which contains the optical fiber inside) is surrounded by single or double layers of aluminum-clad steel (ACS) or mixed ACS and aluminum alloy wires. The design of aluminized stainless steel tube increases the cross-section of aluminum to achieve better fault current and lightning strike resistance. It is suitable for transmission lines requiring small diameter and large fault current. Fiber Optic Cable OPGW
Stranded 12 24 48 Core OPGW Overhead Ground Wire Fiber Optical Cable
OPGW- The Optical fiber composite ground wire is suitable for new installation power lines with double function of ground wire and communication. Especially for installation on normal voltage and extra high-voltage power lines. OPGW can replace conventional ground wire of old power line with increasing fiber communication function. They conduct short circuit current and provide lightning resistance. OPGW Cable Features Fiberscan up to 144; Good corrosion resistance Cable
OPGW fiber optical cable electrico compuesto bajo voltaje Composite Low Voltage Electric ground wire center tube
The optical fiber is loosely placed in a sealed, water-blocking stainless steel tube and filled with water-blocking cable paste. Under different environmental conditions, the steel tube provides protection for the optical fiber during work and insulation. The aluminum layer on the outside of the tube is optional. The stainless steel is located at the center of the cable, protected by one or more layers of aluminum-clad steel and aluminum wrapping wire. Aluminum-clad steel
Figure 8 Gytc8y Fiber Optical Cable Layer Stranded Self-Supporting g652d SM aerial internet wire construction
Application: Loose tube type figure-8 cable with wire/strand metal center reinforcement and moisture-proof inner sheathing with sling wire suitable for pole to pole or pole to house overhead installation. The tubes contain single mode or multimode fibers that are color coded according to a color coding scheme. Features: Low attenuation, low dispersion Excellent mechanical and environmental performance due to correct design, precise residual length and wiring process 3.twisted
High quality GYXTW Optical Fiber Cable 12 Core with Parallel for networking equipment
Description: The GYXTW cable is either single mode or multi-mode and is placed in a loose sleeve made of high modulus plastic. The tube is filled with a waterproof filling compound. A layer of PSP is wound longitudinally between the tube bodies, and the loose tube is coated with a water-blocking material to keep the cable compact and waterproof. Two parallel steel wires are placed on either side of the strip. The cable is fitted with a polyethylene (PE) jacket. Features: Good
Direct Buried GYTA53 Fiber Optic Cable 4 8 12 24 Core for communication networking
GYTA53 fiber optic cable is a strong and durable fiber optic cable suitable for outdoor direct burial and overhead installation. It adopts double-layer metal armor and jacket structure, which provides excellent protection and anti-interference ability for optical fibers. GYTA53 optical cable has high-strength strip steel, which can increase the tensile force and compression resistance, and adapt to different environments and installation conditions. It can provide stable and
Outdoor GYFTY Optical Fiber Cable SM12 24 48 96 Core for aerial and duct install
Structure characters: Non-metallic strengthen member Reinforced with glass or aramid yarn PE outer sheath We can design any kind of structures according to environmental condition and transmission capacity, such as GYFTA, GYFXTY, GYFDTZA etc. Properties: Non-metallic structure providing excellent anti-electromagnetism Anti-thunder and anti-static performances. Applicable Fields: 1.Long distance telecommute, LAN in high voltage area or access to telecommute network; 2.For
GYXTW Single-mode 2-12 Core Steel Tape Armored Fiber Optic Cable with G652D PE for LAN Communication
GYXTW optical cable, central tube type (2~12 cores), the tube contains fiber core and grease, plus steel tape armor, and PE outer sheath prevents two reinforced parallel steel wires. Suitable for duct or overhead applications. Tubes contain optical fibers that are color-coded according to a color-coding scheme. Generally speaking, G652D single-mode fiber is more widely used. Application This cable is ideal for in long distance and inter office communication in strong current
GYXTW Fiber Optic Cable Central Tube 12 core Outdoor Aerial for connecting communication equipment
In the GYXTW type optical cable structure, the single-mode or multi-mode optical fiber is covered with a unit tube, and the unit tube is filled with waterproof filler. The outside of the tube is longitudinally covered by a layer of double-sided plastic-coated corrugated steel tape, and the waterproof material is used between the steel tape and the loose tube to ensure the compact structure and longitudinal waterproof of the optical cable. There are two parallel steel wires on
Outdoor GYFTY Aerial Fiber Optic Cable 12 Core with High Quality communication
GYFTY fiber optic cable- Loose tube style, optical fiber cable with non-metallic central strength member of FRP and peripheral strength members with moisture barrier inner sheathed. Cable protected by a black PE oversheath, suitable for duct or aerial application. Tubes contain optical single-mode or multimode fibers colour color coding scheme. Characteristics: 1.Excellent mechanical and temperature performance 2.Special loose tube filling compound ensure a critical
Outdoor GYXTW cable Light-Armored 2 4 6 8 10 12 14 Core for Internet installation
GYXTW fiber optic cable, single-mode/multimode fibers are positioned in the loose tube, which is made of high modulus plastic materials and filled with filling compound. PSP is longitudinally applied around the loose tube, and water-blocking materials are distributed into interstices between them to guarantee the compactness and longitudinal water-blocking performance. Two parallel steel wires are placed at both sides of the cable core while PE sheath is extruded over it.
